2007 New Holland Construction C175

$19,900.00


New/Used
Used
Usage
2900 Hours
Availability
In Stock
Location
Luxemburg Implement Co.
Title
Clean
Condition
Good
Year
2007
Manufacturer
New Holland Construction
Model
C175

Overview

Dealer Insights

CAB, HEAT. 2 SPEED, POWER ATTACHMENT

Description

Lifting performance with the unmatched stability of tracks New Holland compact track loaders combine the best performance advantages into one machine. You get the superior reach and lift capacity of the exclusive Super Boom™ loader arm design along with the superior flotation, traction, and stability of tracks. Equipped with 72" dirt and foundry bucket and 12.6" track belt width.

    Patented Super Boom™ design advantages:
    • Vertical lift linkage lifts the load up and away for maximum reach at maximum height
    • Design also helps keep the bucket level for less spillback, even with a full load
    • Low center of gravity reduces tipping and increases lift capacity
    • Industry-leading rear visibility with no frame towers to block your view
    Advantages of wide, durable tracks:
    • Improved traction in loose, sandy, or muddy conditions so you can push heavier loads
    • Faster travel speeds—even over rough ground
    • Low ground pressure gives you maximum flotation and minimum soil disturbance
    • A wide stance to improve stability and give you the smoothest ride.
    ENGINE
    • Make and model: New Holland N844LT
    • Fuel: Diesel
    • Gross power @ RPM, hp (kW): 78 (58) @ 2300
    • Net power @ RPM, hp (kW): 72 (54) @ 2300
    • Peak torque, lb.-ft. (N-m) @ RPM: 228 (309) @ 1400
    • Number of cylinders: 3
    • Displacement, cu. in. (l): 205 (3.4)
    • Aspiration: Turbocharged
    • Cooling type: Water
    DRIVE TRAIN
    • Max travel speed- forward, mph (kph): 7.4 (11.9)
    • Width over tracks, in. (mm): 71.1 (1810)
    • Track width, in. (mm): 12.6 (320)
    HYDRAULICS
    • System type: Open
    • Main pump type: Gear
    • Total flow, gpm (l/min): 17.2 (65.1)
    • Main relief pressure, psi (bar): 2,550 (176)
    • Optional high flow, gpm (l/min): 25.5 (96.5)
    PERFORMANCE LOADER ARMS
    • Linkage geometry: Vertical lift
    • Rated operating load (35% of tipping load), lbs. (kg): 2,200 (998)
    • Straight tipping load, lbs. (kg): 6,300 (2858)
    • Bucket breakout force, lbs. (kg): 4,312 (1956)
    • Max dump angle at full height, degrees: 43
    • Dump clearance at full height discharge, in. (mm): 95 (2410)
    • Dump reach at full height discharge, in. (mm): 30.7 (780)
    • Max hinge pin height, in. (mm): 119.2 (3030)
    • Bucket rollback at carry position, degrees: 37
    DIMENSIONS
    • Length with bucket down, in. (mm): 129.5 (3290)
    • Width w/bucket, in. (mm): 72 (1830)
    • Height to top of cab, in. (mm): 75.4 (1920)
    • Ground clearance, in. (mm): 7.9 (200)
    OTHER FEATURES
    • Standard ROPS: Tilt forward
    • Self leveling bucket: Std.
    OPERATING WEIGHTS
    • Operating weight, lbs. (kg): 7,535 (3418)
    SERVICE CAPACITIES
    • Fuel tank, gal. (l): 14.4 (55)
    • Cooling system, gal. (l): 4.5 (17)
    • Hydraulic system total, gal. (l): 15 (57)

    Specs

    Engine

    Engine Type
    N844LT 4 cylinder, 135.3 cu. in. (2.2 l) water cooled
    Engine Manufacturer
    New Holland
    Horsepower
    60 hp (45 kW) @ 2900 rpm
    Rated RPM
    2900 rpm
    Aspiration
    Turbocharged
    Fuel Capacity
    14.4 gal. (55 l)

    General

    SAE Rated Operating Capacity
    2,200 lbs. (998 kg)
    Self Leveling Bucket
    Standard
    Max Ground Speed
    7.4 mph (11.9 kph)
    Length
    129.5 in. (3290 mm)
    Width
    72 in. (1830 mm)
    Height
    75.4 in. (1920 mm)
    Weight
    7,535 lbs. (3418 kg)